# Package time

`import "time"`
Overview
Index
Examples

## Overview ▾

Package time provides functionality for measuring and displaying time.

The calendrical calculations always assume a Gregorian calendar, with no leap seconds.

### Monotonic Clocks

Operating systems provide both a “wall clock,” which is subject to changes for clock synchronization, and a “monotonic clock,” which is not. The general rule is that the wall clock is for telling time and the monotonic clock is for measuring time. Rather than split the API, in this package the Time returned by time.Now contains both a wall clock reading and a monotonic clock reading; later time-telling operations use the wall clock reading, but later time-measuring operations, specifically comparisons and subtractions, use the monotonic clock reading.

For example, this code always computes a positive elapsed time of approximately 20 milliseconds, even if the wall clock is changed during the operation being timed:

```start := time.Now()
... operation that takes 20 milliseconds ...
t := time.Now()
elapsed := t.Sub(start)
```

Other idioms, such as time.Since(start), time.Until(deadline), and time.Now().Before(deadline), are similarly robust against wall clock resets.

The rest of this section gives the precise details of how operations use monotonic clocks, but understanding those details is not required to use this package.

The Time returned by time.Now contains a monotonic clock reading. If Time t has a monotonic clock reading, t.Add adds the same duration to both the wall clock and monotonic clock readings to compute the result. Because t.AddDate(y, m, d), t.Round(d), and t.Truncate(d) are wall time computations, they always strip any monotonic clock reading from their results. Because t.In, t.Local, and t.UTC are used for their effect on the interpretation of the wall time, they also strip any monotonic clock reading from their results. The canonical way to strip a monotonic clock reading is to use t = t.Round(0).

If Times t and u both contain monotonic clock readings, the operations t.After(u), t.Before(u), t.Equal(u), and t.Sub(u) are carried out using the monotonic clock readings alone, ignoring the wall clock readings. If either t or u contains no monotonic clock reading, these operations fall back to using the wall clock readings.

On some systems the monotonic clock will stop if the computer goes to sleep. On such a system, t.Sub(u) may not accurately reflect the actual time that passed between t and u.

Because the monotonic clock reading has no meaning outside the current process, the serialized forms generated by t.GobEncode, t.MarshalBinary, t.MarshalJSON, and t.MarshalText omit the monotonic clock reading, and t.Format provides no format for it. Similarly, the constructors time.Date, time.Parse, time.ParseInLocation, and time.Unix, as well as the unmarshalers t.GobDecode, t.UnmarshalBinary. t.UnmarshalJSON, and t.UnmarshalText always create times with no monotonic clock reading.

Note that the Go == operator compares not just the time instant but also the Location and the monotonic clock reading. See the documentation for the Time type for a discussion of equality testing for Time values.

For debugging, the result of t.String does include the monotonic clock reading if present. If t != u because of different monotonic clock readings, that difference will be visible when printing t.String() and u.String().

## Index ▾

Constants
func After(d Duration) <-chan Time
func Sleep(d Duration)
func Tick(d Duration) <-chan Time
type Duration
func ParseDuration(s string) (Duration, error)
func Since(t Time) Duration
func Until(t Time) Duration
func (d Duration) Hours() float64
func (d Duration) Minutes() float64
func (d Duration) Nanoseconds() int64
func (d Duration) Round(m Duration) Duration
func (d Duration) Seconds() float64
func (d Duration) String() string
func (d Duration) Truncate(m Duration) Duration
type Location
func FixedZone(name string, offset int) *Location
func LoadLocation(name string) (*Location, error)
func LoadLocationFromTZData(name string, data []byte) (*Location, error)
func (l *Location) String() string
type Month
func (m Month) String() string
type ParseError
func (e *ParseError) Error() string
type Ticker
func NewTicker(d Duration) *Ticker
func (t *Ticker) Stop()
type Time
func Date(year int, month Month, day, hour, min, sec, nsec int, loc *Location) Time
func Now() Time
func Parse(layout, value string) (Time, error)
func ParseInLocation(layout, value string, loc *Location) (Time, error)
func Unix(sec int64, nsec int64) Time
func (t Time) Add(d Duration) Time
func (t Time) AddDate(years int, months int, days int) Time
func (t Time) After(u Time) bool
func (t Time) AppendFormat(b []byte, layout string) []byte
func (t Time) Before(u Time) bool
func (t Time) Clock() (hour, min, sec int)
func (t Time) Date() (year int, month Month, day int)
func (t Time) Day() int
func (t Time) Equal(u Time) bool
func (t Time) Format(layout string) string
func (t *Time) GobDecode(data []byte) error
func (t Time) GobEncode() ([]byte, error)
func (t Time) Hour() int
func (t Time) ISOWeek() (year, week int)
func (t Time) In(loc *Location) Time
func (t Time) IsZero() bool
func (t Time) Local() Time
func (t Time) Location() *Location
func (t Time) MarshalBinary() ([]byte, error)
func (t Time) MarshalJSON() ([]byte, error)
func (t Time) MarshalText() ([]byte, error)
func (t Time) Minute() int
func (t Time) Month() Month
func (t Time) Nanosecond() int
func (t Time) Round(d Duration) Time
func (t Time) Second() int
func (t Time) String() string
func (t Time) Sub(u Time) Duration
func (t Time) Truncate(d Duration) Time
func (t Time) UTC() Time
func (t Time) Unix() int64
func (t Time) UnixNano() int64
func (t *Time) UnmarshalBinary(data []byte) error
func (t *Time) UnmarshalJSON(data []byte) error
func (t *Time) UnmarshalText(data []byte) error
func (t Time) Weekday() Weekday
func (t Time) Year() int
func (t Time) YearDay() int
func (t Time) Zone() (name string, offset int)
type Timer
func AfterFunc(d Duration, f func()) *Timer
func NewTimer(d Duration) *Timer
func (t *Timer) Reset(d Duration) bool
func (t *Timer) Stop() bool
type Weekday
func (d Weekday) String() string

## Constants

These are predefined layouts for use in Time.Format and time.Parse. The reference time used in the layouts is the specific time:

```Mon Jan 2 15:04:05 MST 2006
```

which is Unix time 1136239445. Since MST is GMT-0700, the reference time can be thought of as

```01/02 03:04:05PM '06 -0700
```

To define your own format, write down what the reference time would look like formatted your way; see the values of constants like ANSIC, StampMicro or Kitchen for examples. The model is to demonstrate what the reference time looks like so that the Format and Parse methods can apply the same transformation to a general time value.

Some valid layouts are invalid time values for time.Parse, due to formats such as _ for space padding and Z for zone information.

Within the format string, an underscore _ represents a space that may be replaced by a digit if the following number (a day) has two digits; for compatibility with fixed-width Unix time formats.

A decimal point followed by one or more zeros represents a fractional second, printed to the given number of decimal places. A decimal point followed by one or more nines represents a fractional second, printed to the given number of decimal places, with trailing zeros removed. When parsing (only), the input may contain a fractional second field immediately after the seconds field, even if the layout does not signify its presence. In that case a decimal point followed by a maximal series of digits is parsed as a fractional second.

Numeric time zone offsets format as follows:

```-0700  ±hhmm
-07:00 ±hh:mm
-07    ±hh
```

Replacing the sign in the format with a Z triggers the ISO 8601 behavior of printing Z instead of an offset for the UTC zone. Thus:

```Z0700  Z or ±hhmm
Z07:00 Z or ±hh:mm
Z07    Z or ±hh
```

The recognized day of week formats are "Mon" and "Monday". The recognized month formats are "Jan" and "January".

Text in the format string that is not recognized as part of the reference time is echoed verbatim during Format and expected to appear verbatim in the input to Parse.

The executable example for Time.Format demonstrates the working of the layout string in detail and is a good reference.

Note that the RFC822, RFC850, and RFC1123 formats should be applied only to local times. Applying them to UTC times will use "UTC" as the time zone abbreviation, while strictly speaking those RFCs require the use of "GMT" in that case. In general RFC1123Z should be used instead of RFC1123 for servers that insist on that format, and RFC3339 should be preferred for new protocols. RFC3339, RFC822, RFC822Z, RFC1123, and RFC1123Z are useful for formatting; when used with time.Parse they do not accept all the time formats permitted by the RFCs. The RFC3339Nano format removes trailing zeros from the seconds field and thus may not sort correctly once formatted.

```const (
ANSIC       = "Mon Jan _2 15:04:05 2006"
UnixDate    = "Mon Jan _2 15:04:05 MST 2006"
RubyDate    = "Mon Jan 02 15:04:05 -0700 2006"
RFC822      = "02 Jan 06 15:04 MST"
RFC822Z     = "02 Jan 06 15:04 -0700" // RFC822 with numeric zone
RFC850      = "Monday, 02-Jan-06 15:04:05 MST"
RFC1123     = "Mon, 02 Jan 2006 15:04:05 MST"
RFC1123Z    = "Mon, 02 Jan 2006 15:04:05 -0700" // RFC1123 with numeric zone
RFC3339     = "2006-01-02T15:04:05Z07:00"
RFC3339Nano = "2006-01-02T15:04:05.999999999Z07:00"
Kitchen     = "3:04PM"
// Handy time stamps.
Stamp      = "Jan _2 15:04:05"
StampMilli = "Jan _2 15:04:05.000"
StampMicro = "Jan _2 15:04:05.000000"
StampNano  = "Jan _2 15:04:05.000000000"
)```

Common durations. There is no definition for units of Day or larger to avoid confusion across daylight savings time zone transitions.

To count the number of units in a Duration, divide:

```second := time.Second
fmt.Print(int64(second/time.Millisecond)) // prints 1000
```

To convert an integer number of units to a Duration, multiply:

```seconds := 10
fmt.Print(time.Duration(seconds)*time.Second) // prints 10s
```
```const (
Nanosecond  Duration = 1
Microsecond          = 1000 * Nanosecond
Millisecond          = 1000 * Microsecond
Second               = 1000 * Millisecond
Minute               = 60 * Second
Hour                 = 60 * Minute
)```

## func After¶

`func After(d Duration) <-chan Time`

After waits for the duration to elapse and then sends the current time on the returned channel. It is equivalent to NewTimer(d).C. The underlying Timer is not recovered by the garbage collector until the timer fires. If efficiency is a concern, use NewTimer instead and call Timer.Stop if the timer is no longer needed.

Example

## func Sleep¶

`func Sleep(d Duration)`

Sleep pauses the current goroutine for at least the duration d. A negative or zero duration causes Sleep to return immediately.

Example

## func Tick¶

`func Tick(d Duration) <-chan Time`

Tick is a convenience wrapper for NewTicker providing access to the ticking channel only. While Tick is useful for clients that have no need to shut down the Ticker, be aware that without a way to shut it down the underlying Ticker cannot be recovered by the garbage collector; it "leaks". Unlike NewTicker, Tick will return nil if d <= 0.

Example

## type Duration¶

A Duration represents the elapsed time between two instants as an int64 nanosecond count. The representation limits the largest representable duration to approximately 290 years.

`type Duration int64`

Example

### func ParseDuration¶

`func ParseDuration(s string) (Duration, error)`

ParseDuration parses a duration string. A duration string is a possibly signed sequence of decimal numbers, each with optional fraction and a unit suffix, such as "300ms", "-1.5h" or "2h45m". Valid time units are "ns", "us" (or "µs"), "ms", "s", "m", "h".

Example

```10h0m0s
1h10m10s
there are 4210 seconds in 1h10m10s
```

### func Since¶

`func Since(t Time) Duration`

Since returns the time elapsed since t. It is shorthand for time.Now().Sub(t).

### func Until¶1.8

`func Until(t Time) Duration`

Until returns the duration until t. It is shorthand for t.Sub(time.Now()).

### func (Duration) Hours¶

`func (d Duration) Hours() float64`

Hours returns the duration as a floating point number of hours.

Example

```I've got 4.5 hours of work left.
```

### func (Duration) Minutes¶

`func (d Duration) Minutes() float64`

Minutes returns the duration as a floating point number of minutes.

Example

```The movie is 90 minutes long.
```

### func (Duration) Nanoseconds¶

`func (d Duration) Nanoseconds() int64`

Nanoseconds returns the duration as an integer nanosecond count.

Example

```one microsecond has 1000 nanoseconds.
```

### func (Duration) Round¶1.9

`func (d Duration) Round(m Duration) Duration`

Round returns the result of rounding d to the nearest multiple of m. The rounding behavior for halfway values is to round away from zero. If the result exceeds the maximum (or minimum) value that can be stored in a Duration, Round returns the maximum (or minimum) duration. If m <= 0, Round returns d unchanged.

Example

```d.Round(   1ns) = 1h15m30.918273645s
d.Round(   1µs) = 1h15m30.918274s
d.Round(   1ms) = 1h15m30.918s
d.Round(    1s) = 1h15m31s
d.Round(    2s) = 1h15m30s
d.Round(  1m0s) = 1h16m0s
d.Round( 10m0s) = 1h20m0s
d.Round(1h0m0s) = 1h0m0s
```

### func (Duration) Seconds¶

`func (d Duration) Seconds() float64`

Seconds returns the duration as a floating point number of seconds.

Example

```take off in t-90 seconds.
```

### func (Duration) String¶

`func (d Duration) String() string`

String returns a string representing the duration in the form "72h3m0.5s". Leading zero units are omitted. As a special case, durations less than one second format use a smaller unit (milli-, micro-, or nanoseconds) to ensure that the leading digit is non-zero. The zero duration formats as 0s.

Example

```4440h0m0s
```

### func (Duration) Truncate¶1.9

`func (d Duration) Truncate(m Duration) Duration`

Truncate returns the result of rounding d toward zero to a multiple of m. If m <= 0, Truncate returns d unchanged.

Example

```d.Truncate(   1ns) = 1h15m30.918273645s
d.Truncate(   1µs) = 1h15m30.918273s
d.Truncate(   1ms) = 1h15m30.918s
d.Truncate(    1s) = 1h15m30s
d.Truncate(    2s) = 1h15m30s
d.Truncate(  1m0s) = 1h15m0s
d.Truncate( 10m0s) = 1h10m0s
d.Truncate(1h0m0s) = 1h0m0s
```

## type Location¶

A Location maps time instants to the zone in use at that time. Typically, the Location represents the collection of time offsets in use in a geographical area, such as CEST and CET for central Europe.

```type Location struct {
// contains filtered or unexported fields
}
```

Local represents the system's local time zone.

`var Local *Location = &localLoc`

UTC represents Universal Coordinated Time (UTC).

`var UTC *Location = &utcLoc`

Example

```true
```

### func FixedZone¶

`func FixedZone(name string, offset int) *Location`

FixedZone returns a Location that always uses the given zone name and offset (seconds east of UTC).

Example

```The time is: 10 Nov 09 23:00 UTC-8
```

`func LoadLocation(name string) (*Location, error)`

LoadLocation returns the Location with the given name.

If the name is "" or "UTC", LoadLocation returns UTC. If the name is "Local", LoadLocation returns Local.

Otherwise, the name is taken to be a location name corresponding to a file in the IANA Time Zone database, such as "America/New_York".

The time zone database needed by LoadLocation may not be present on all systems, especially non-Unix systems. LoadLocation looks in the directory or uncompressed zip file named by the ZONEINFO environment variable, if any, then looks in known installation locations on Unix systems, and finally looks in \$GOROOT/lib/time/zoneinfo.zip.

Example

```2018-08-30 05:00:00 -0700 PDT
```

`func LoadLocationFromTZData(name string, data []byte) (*Location, error)`

LoadLocationFromTZData returns a Location with the given name initialized from the IANA Time Zone database-formatted data. The data should be in the format of a standard IANA time zone file (for example, the content of /etc/localtime on Unix systems).

### func (*Location) String¶

`func (l *Location) String() string`

String returns a descriptive name for the time zone information, corresponding to the name argument to LoadLocation or FixedZone.

## type Month¶

A Month specifies a month of the year (January = 1, ...).

`type Month int`
```const (
January Month = 1 + iota
February
March
April
May
June
July
August
September
October
November
December
)```

Example

### func (Month) String¶

`func (m Month) String() string`

String returns the English name of the month ("January", "February", ...).

## type ParseError¶

ParseError describes a problem parsing a time string.

```type ParseError struct {
Layout     string
Value      string
LayoutElem string
ValueElem  string
Message    string
}
```

### func (*ParseError) Error¶

`func (e *ParseError) Error() string`

Error returns the string representation of a ParseError.

## type Ticker¶

A Ticker holds a channel that delivers `ticks' of a clock at intervals.

```type Ticker struct {
C <-chan Time // The channel on which the ticks are delivered.
// contains filtered or unexported fields
}
```

### func NewTicker¶

`func NewTicker(d Duration) *Ticker`

NewTicker returns a new Ticker containing a channel that will send the time with a period specified by the duration argument. It adjusts the intervals or drops ticks to make up for slow receivers. The duration d must be greater than zero; if not, NewTicker will panic. Stop the ticker to release associated resources.

Example

### func (*Ticker) Stop¶

`func (t *Ticker) Stop()`

Stop turns off a ticker. After Stop, no more ticks will be sent. Stop does not close the channel, to prevent a concurrent goroutine reading from the channel from seeing an erroneous "tick".

## type Time¶

A Time represents an instant in time with nanosecond precision.

Programs using times should typically store and pass them as values, not pointers. That is, time variables and struct fields should be of type time.Time, not *time.Time.

A Time value can be used by multiple goroutines simultaneously except that the methods GobDecode, UnmarshalBinary, UnmarshalJSON and UnmarshalText are not concurrency-safe.

Time instants can be compared using the Before, After, and Equal methods. The Sub method subtracts two instants, producing a Duration. The Add method adds a Time and a Duration, producing a Time.

The zero value of type Time is January 1, year 1, 00:00:00.000000000 UTC. As this time is unlikely to come up in practice, the IsZero method gives a simple way of detecting a time that has not been initialized explicitly.

Each Time has associated with it a Location, consulted when computing the presentation form of the time, such as in the Format, Hour, and Year methods. The methods Local, UTC, and In return a Time with a specific location. Changing the location in this way changes only the presentation; it does not change the instant in time being denoted and therefore does not affect the computations described in earlier paragraphs.

Representations of a Time value saved by the GobEncode, MarshalBinary, MarshalJSON, and MarshalText methods store the Time.Location's offset, but not the location name. They therefore lose information about Daylight Saving Time.

In addition to the required “wall clock” reading, a Time may contain an optional reading of the current process's monotonic clock, to provide additional precision for comparison or subtraction. See the “Monotonic Clocks” section in the package documentation for details.

Note that the Go == operator compares not just the time instant but also the Location and the monotonic clock reading. Therefore, Time values should not be used as map or database keys without first guaranteeing that the identical Location has been set for all values, which can be achieved through use of the UTC or Local method, and that the monotonic clock reading has been stripped by setting t = t.Round(0). In general, prefer t.Equal(u) to t == u, since t.Equal uses the most accurate comparison available and correctly handles the case when only one of its arguments has a monotonic clock reading.

```type Time struct {
// contains filtered or unexported fields
}
```

### func Date¶

`func Date(year int, month Month, day, hour, min, sec, nsec int, loc *Location) Time`

Date returns the Time corresponding to

```yyyy-mm-dd hh:mm:ss + nsec nanoseconds
```

in the appropriate zone for that time in the given location.

The month, day, hour, min, sec, and nsec values may be outside their usual ranges and will be normalized during the conversion. For example, October 32 converts to November 1.

A daylight savings time transition skips or repeats times. For example, in the United States, March 13, 2011 2:15am never occurred, while November 6, 2011 1:15am occurred twice. In such cases, the choice of time zone, and therefore the time, is not well-defined. Date returns a time that is correct in one of the two zones involved in the transition, but it does not guarantee which.

Date panics if loc is nil.

Example

```Go launched at 2009-11-10 15:00:00 -0800 PST
```

### func Now¶

`func Now() Time`

Now returns the current local time.

### func Parse¶

`func Parse(layout, value string) (Time, error)`

Parse parses a formatted string and returns the time value it represents. The layout defines the format by showing how the reference time, defined to be

```Mon Jan 2 15:04:05 -0700 MST 2006
```

would be interpreted if it were the value; it serves as an example of the input format. The same interpretation will then be made to the input string.

Predefined layouts ANSIC, UnixDate, RFC3339 and others describe standard and convenient representations of the reference time. For more information about the formats and the definition of the reference time, see the documentation for ANSIC and the other constants defined by this package. Also, the executable example for Time.Format demonstrates the working of the layout string in detail and is a good reference.

Elements omitted from the value are assumed to be zero or, when zero is impossible, one, so parsing "3:04pm" returns the time corresponding to Jan 1, year 0, 15:04:00 UTC (note that because the year is 0, this time is before the zero Time). Years must be in the range 0000..9999. The day of the week is checked for syntax but it is otherwise ignored.

In the absence of a time zone indicator, Parse returns a time in UTC.

When parsing a time with a zone offset like -0700, if the offset corresponds to a time zone used by the current location (Local), then Parse uses that location and zone in the returned time. Otherwise it records the time as being in a fabricated location with time fixed at the given zone offset.

When parsing a time with a zone abbreviation like MST, if the zone abbreviation has a defined offset in the current location, then that offset is used. The zone abbreviation "UTC" is recognized as UTC regardless of location. If the zone abbreviation is unknown, Parse records the time as being in a fabricated location with the given zone abbreviation and a zero offset. This choice means that such a time can be parsed and reformatted with the same layout losslessly, but the exact instant used in the representation will differ by the actual zone offset. To avoid such problems, prefer time layouts that use a numeric zone offset, or use ParseInLocation.

Example

```2013-02-03 19:54:00 -0800 PST
2013-02-03 00:00:00 +0000 UTC
2006-01-02 15:04:05 +0000 UTC
2006-01-02 15:04:05 +0700 +0700
error parsing time "2006-01-02T15:04:05Z07:00": extra text: 07:00
```

### func ParseInLocation¶1.1

`func ParseInLocation(layout, value string, loc *Location) (Time, error)`

ParseInLocation is like Parse but differs in two important ways. First, in the absence of time zone information, Parse interprets a time as UTC; ParseInLocation interprets the time as in the given location. Second, when given a zone offset or abbreviation, Parse tries to match it against the Local location; ParseInLocation uses the given location.

Example

```2012-07-09 05:02:00 +0200 CEST
2012-07-09 00:00:00 +0200 CEST
```

### func Unix¶

`func Unix(sec int64, nsec int64) Time`

Unix returns the local Time corresponding to the given Unix time, sec seconds and nsec nanoseconds since January 1, 1970 UTC. It is valid to pass nsec outside the range [0, 999999999]. Not all sec values have a corresponding time value. One such value is 1<<63-1 (the largest int64 value).

### func (Time) Add¶

`func (t Time) Add(d Duration) Time`

Add returns the time t+d.

Example

```start = 2009-01-01 12:00:00 +0000 UTC
start.Add(time.Second * 10) = 2009-01-01 12:00:10 +0000 UTC
start.Add(time.Minute * 10) = 2009-01-01 12:10:00 +0000 UTC
start.Add(time.Hour * 10) = 2009-01-01 22:00:00 +0000 UTC
start.Add(time.Hour * 24 * 10) = 2009-01-11 12:00:00 +0000 UTC
```

### func (Time) AddDate¶

`func (t Time) AddDate(years int, months int, days int) Time`

AddDate returns the time corresponding to adding the given number of years, months, and days to t. For example, AddDate(-1, 2, 3) applied to January 1, 2011 returns March 4, 2010.

AddDate normalizes its result in the same way that Date does, so, for example, adding one month to October 31 yields December 1, the normalized form for November 31.

Example

```oneDayLater: start.AddDate(0, 0, 1) = 2009-01-02 00:00:00 +0000 UTC
oneMonthLater: start.AddDate(0, 1, 0) = 2009-02-01 00:00:00 +0000 UTC
oneYearLater: start.AddDate(1, 0, 0) = 2010-01-01 00:00:00 +0000 UTC
```

### func (Time) After¶

`func (t Time) After(u Time) bool`

After reports whether the time instant t is after u.

Example

```year3000.After(year2000) = true
year2000.After(year3000) = false
```

### func (Time) AppendFormat¶1.5

`func (t Time) AppendFormat(b []byte, layout string) []byte`

AppendFormat is like Format but appends the textual representation to b and returns the extended buffer.

Example

```Time: 11:00AM
```

### func (Time) Before¶

`func (t Time) Before(u Time) bool`

Before reports whether the time instant t is before u.

Example

```year2000.Before(year3000) = true
year3000.Before(year2000) = false
```

### func (Time) Clock¶

`func (t Time) Clock() (hour, min, sec int)`

Clock returns the hour, minute, and second within the day specified by t.

### func (Time) Date¶

`func (t Time) Date() (year int, month Month, day int)`

Date returns the year, month, and day in which t occurs.

Example

```year = 2000
month = February
day = 1
```

### func (Time) Day¶

`func (t Time) Day() int`

Day returns the day of the month specified by t.

Example

```day = 1
```

### func (Time) Equal¶

`func (t Time) Equal(u Time) bool`

Equal reports whether t and u represent the same time instant. Two times can be equal even if they are in different locations. For example, 6:00 +0200 CEST and 4:00 UTC are Equal. See the documentation on the Time type for the pitfalls of using == with Time values; most code should use Equal instead.

Example

```datesEqualUsingEqualOperator = false
datesEqualUsingFunction = true
```

### func (Time) Format¶

`func (t Time) Format(layout string) string`

Format returns a textual representation of the time value formatted according to layout, which defines the format by showing how the reference time, defined to be

```Mon Jan 2 15:04:05 -0700 MST 2006
```

would be displayed if it were the value; it serves as an example of the desired output. The same display rules will then be applied to the time value.

A fractional second is represented by adding a period and zeros to the end of the seconds section of layout string, as in "15:04:05.000" to format a time stamp with millisecond precision.

Predefined layouts ANSIC, UnixDate, RFC3339 and others describe standard and convenient representations of the reference time. For more information about the formats and the definition of the reference time, see the documentation for ANSIC and the other constants defined by this package.

Example

```default format: 2015-03-07 11:06:39 -0800 PST
Unix format: Sat Mar  7 11:06:39 PST 2015
Same, in UTC: Sat Mar  7 19:06:39 UTC 2015

Formats:

Basic           "Mon Jan 2 15:04:05 MST 2006" gives "Sat Mar 7 11:06:39 PST 2015"
No pad          "<2>" gives "<7>"
Spaces          "<_2>" gives "< 7>"
Zeros           "<02>" gives "<07>"
Suppressed pad  "04:05" gives "06:39"
Unix            "Mon Jan _2 15:04:05 MST 2006" gives "Sat Mar  7 11:06:39 PST 2015"
AM/PM           "3PM==3pm==15h" gives "11AM==11am==11h"
No fraction     "Mon Jan _2 15:04:05 MST 2006" gives "Sat Mar  7 11:06:39 PST 2015"
0s for fraction "15:04:05.00000" gives "11:06:39.12340"
9s for fraction "15:04:05.99999999" gives "11:06:39.1234"
```

### func (*Time) GobDecode¶

`func (t *Time) GobDecode(data []byte) error`

GobDecode implements the gob.GobDecoder interface.

### func (Time) GobEncode¶

`func (t Time) GobEncode() ([]byte, error)`

GobEncode implements the gob.GobEncoder interface.

### func (Time) Hour¶

`func (t Time) Hour() int`

Hour returns the hour within the day specified by t, in the range [0, 23].

### func (Time) ISOWeek¶

`func (t Time) ISOWeek() (year, week int)`

ISOWeek returns the ISO 8601 year and week number in which t occurs. Week ranges from 1 to 53. Jan 01 to Jan 03 of year n might belong to week 52 or 53 of year n-1, and Dec 29 to Dec 31 might belong to week 1 of year n+1.

### func (Time) In¶

`func (t Time) In(loc *Location) Time`

In returns a copy of t representing the same time instant, but with the copy's location information set to loc for display purposes.

In panics if loc is nil.

### func (Time) IsZero¶

`func (t Time) IsZero() bool`

IsZero reports whether t represents the zero time instant, January 1, year 1, 00:00:00 UTC.

### func (Time) Local¶

`func (t Time) Local() Time`

Local returns t with the location set to local time.

### func (Time) Location¶

`func (t Time) Location() *Location`

Location returns the time zone information associated with t.

### func (Time) MarshalBinary¶1.2

`func (t Time) MarshalBinary() ([]byte, error)`

MarshalBinary implements the encoding.BinaryMarshaler interface.

### func (Time) MarshalJSON¶

`func (t Time) MarshalJSON() ([]byte, error)`

MarshalJSON implements the json.Marshaler interface. The time is a quoted string in RFC 3339 format, with sub-second precision added if present.

### func (Time) MarshalText¶1.2

`func (t Time) MarshalText() ([]byte, error)`

MarshalText implements the encoding.TextMarshaler interface. The time is formatted in RFC 3339 format, with sub-second precision added if present.

### func (Time) Minute¶

`func (t Time) Minute() int`

Minute returns the minute offset within the hour specified by t, in the range [0, 59].

### func (Time) Month¶

`func (t Time) Month() Month`

Month returns the month of the year specified by t.

### func (Time) Nanosecond¶

`func (t Time) Nanosecond() int`

Nanosecond returns the nanosecond offset within the second specified by t, in the range [0, 999999999].

### func (Time) Round¶1.1

`func (t Time) Round(d Duration) Time`

Round returns the result of rounding t to the nearest multiple of d (since the zero time). The rounding behavior for halfway values is to round up. If d <= 0, Round returns t stripped of any monotonic clock reading but otherwise unchanged.

Round operates on the time as an absolute duration since the zero time; it does not operate on the presentation form of the time. Thus, Round(Hour) may return a time with a non-zero minute, depending on the time's Location.

Example

```t.Round(   1ns) = 12:15:30.918273645
t.Round(   1µs) = 12:15:30.918274
t.Round(   1ms) = 12:15:30.918
t.Round(    1s) = 12:15:31
t.Round(    2s) = 12:15:30
t.Round(  1m0s) = 12:16:00
t.Round( 10m0s) = 12:20:00
t.Round(1h0m0s) = 12:00:00
```

### func (Time) Second¶

`func (t Time) Second() int`

Second returns the second offset within the minute specified by t, in the range [0, 59].

### func (Time) String¶

`func (t Time) String() string`

String returns the time formatted using the format string

```"2006-01-02 15:04:05.999999999 -0700 MST"
```

If the time has a monotonic clock reading, the returned string includes a final field "m=±<value>", where value is the monotonic clock reading formatted as a decimal number of seconds.

The returned string is meant for debugging; for a stable serialized representation, use t.MarshalText, t.MarshalBinary, or t.Format with an explicit format string.

Example

```withNanoseconds = 2000-02-01 12:13:14.000000015 +0000 UTC
withoutNanoseconds = 2000-02-01 12:13:14 +0000 UTC
```

### func (Time) Sub¶

`func (t Time) Sub(u Time) Duration`

Sub returns the duration t-u. If the result exceeds the maximum (or minimum) value that can be stored in a Duration, the maximum (or minimum) duration will be returned. To compute t-d for a duration d, use t.Add(-d).

Example

```difference = 12h0m0s
```

### func (Time) Truncate¶1.1

`func (t Time) Truncate(d Duration) Time`

Truncate returns the result of rounding t down to a multiple of d (since the zero time). If d <= 0, Truncate returns t stripped of any monotonic clock reading but otherwise unchanged.

Truncate operates on the time as an absolute duration since the zero time; it does not operate on the presentation form of the time. Thus, Truncate(Hour) may return a time with a non-zero minute, depending on the time's Location.

Example

```t.Truncate(  1ns) = 12:15:30.918273645
t.Truncate(  1µs) = 12:15:30.918273
t.Truncate(  1ms) = 12:15:30.918
t.Truncate(   1s) = 12:15:30
t.Truncate(   2s) = 12:15:30
t.Truncate( 1m0s) = 12:15:00
t.Truncate(10m0s) = 12:10:00
```

### func (Time) UTC¶

`func (t Time) UTC() Time`

UTC returns t with the location set to UTC.

### func (Time) Unix¶

`func (t Time) Unix() int64`

Unix returns t as a Unix time, the number of seconds elapsed since January 1, 1970 UTC. The result does not depend on the location associated with t.

Example

```2001-09-09 01:46:40 +0000 UTC
2001-09-09 01:46:40 +0000 UTC
2001-09-09 01:46:40 +0000 UTC
1000000000
1000000000000000000
```

### func (Time) UnixNano¶

`func (t Time) UnixNano() int64`

UnixNano returns t as a Unix time, the number of nanoseconds elapsed since January 1, 1970 UTC. The result is undefined if the Unix time in nanoseconds cannot be represented by an int64 (a date before the year 1678 or after 2262). Note that this means the result of calling UnixNano on the zero Time is undefined. The result does not depend on the location associated with t.

### func (*Time) UnmarshalBinary¶1.2

`func (t *Time) UnmarshalBinary(data []byte) error`

UnmarshalBinary implements the encoding.BinaryUnmarshaler interface.

### func (*Time) UnmarshalJSON¶

`func (t *Time) UnmarshalJSON(data []byte) error`

UnmarshalJSON implements the json.Unmarshaler interface. The time is expected to be a quoted string in RFC 3339 format.

### func (*Time) UnmarshalText¶1.2

`func (t *Time) UnmarshalText(data []byte) error`

UnmarshalText implements the encoding.TextUnmarshaler interface. The time is expected to be in RFC 3339 format.

### func (Time) Weekday¶

`func (t Time) Weekday() Weekday`

Weekday returns the day of the week specified by t.

### func (Time) Year¶

`func (t Time) Year() int`

Year returns the year in which t occurs.

### func (Time) YearDay¶1.1

`func (t Time) YearDay() int`

YearDay returns the day of the year specified by t, in the range [1,365] for non-leap years, and [1,366] in leap years.

### func (Time) Zone¶

`func (t Time) Zone() (name string, offset int)`

Zone computes the time zone in effect at time t, returning the abbreviated name of the zone (such as "CET") and its offset in seconds east of UTC.

## type Timer¶

The Timer type represents a single event. When the Timer expires, the current time will be sent on C, unless the Timer was created by AfterFunc. A Timer must be created with NewTimer or AfterFunc.

```type Timer struct {
C <-chan Time
// contains filtered or unexported fields
}
```

### func AfterFunc¶

`func AfterFunc(d Duration, f func()) *Timer`

AfterFunc waits for the duration to elapse and then calls f in its own goroutine. It returns a Timer that can be used to cancel the call using its Stop method.

### func NewTimer¶

`func NewTimer(d Duration) *Timer`

NewTimer creates a new Timer that will send the current time on its channel after at least duration d.

### func (*Timer) Reset¶1.1

`func (t *Timer) Reset(d Duration) bool`

Reset changes the timer to expire after duration d. It returns true if the timer had been active, false if the timer had expired or been stopped.

Resetting a timer must take care not to race with the send into t.C that happens when the current timer expires. If a program has already received a value from t.C, the timer is known to have expired, and t.Reset can be used directly. If a program has not yet received a value from t.C, however, the timer must be stopped and—if Stop reports that the timer expired before being stopped—the channel explicitly drained:

```if !t.Stop() {
<-t.C
}
t.Reset(d)
```

This should not be done concurrent to other receives from the Timer's channel.

Note that it is not possible to use Reset's return value correctly, as there is a race condition between draining the channel and the new timer expiring. Reset should always be invoked on stopped or expired channels, as described above. The return value exists to preserve compatibility with existing programs.

### func (*Timer) Stop¶

`func (t *Timer) Stop() bool`

Stop prevents the Timer from firing. It returns true if the call stops the timer, false if the timer has already expired or been stopped. Stop does not close the channel, to prevent a read from the channel succeeding incorrectly.

To prevent a timer created with NewTimer from firing after a call to Stop, check the return value and drain the channel. For example, assuming the program has not received from t.C already:

```if !t.Stop() {
<-t.C
}
```

This cannot be done concurrent to other receives from the Timer's channel.

For a timer created with AfterFunc(d, f), if t.Stop returns false, then the timer has already expired and the function f has been started in its own goroutine; Stop does not wait for f to complete before returning. If the caller needs to know whether f is completed, it must coordinate with f explicitly.

## type Weekday¶

A Weekday specifies a day of the week (Sunday = 0, ...).

`type Weekday int`
```const (
Sunday Weekday = iota
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
)```

### func (Weekday) String¶

`func (d Weekday) String() string`

String returns the English name of the day ("Sunday", "Monday", ...).